Introduction Lotoo PAW GT2

 

Lotoo PAW GT2 seeks to establish a new benchmark in portable music players, designed with the discerning audiophile in mind. This device combines remarkable technical specifications with a thoughtfully designed aesthetic, providing an exceptional listening experience.

 

The PAW GT2 with its innovative, ingenious “sandwich structure”, it maximizes isolation and shielding, ensuring the purest sound experience possible. Its unprecedentedly low distortion, combined with an exceptional 133dB signal-to-noise ratio (SNR), delivers unmatched clarity to preserve the sonic precision. The output power has been boosted to an impressive 1000mW per channel. While many handheld players opt for lower power, the GT2 goes beyond, offering music with depth and precision like never before.

 

Lotoo PAW GT2

 

DAC and Upsampling

PAW GT2 is equipped with flagship AK4191EQ and dual AK4499EX DACs, providing support for PCM 768kHz and DSD512 for impeccable sound quality. A dedicated AK4137EQ upsampling chip provides conversion and upsampling between DSD and PCM for maximum flexibility.

 

LTTP Protocol

Lotoo’s proprietary Teleport Protocol (LTTP) enables wireless audio transmission with high bitrates and minimal latency. Support for transmission at resolutions up to 96 kHz/24 bits and up to 1.5 Mbps ensures high-quality sound and precise signal synchronization.

 

Powerful Amplification

The PAW GT2 offers up to 1000 mW of output power, allowing it to easily drive a wide range of headphones. The high signal-to-noise ratio (133 dB) and low noise level (0.8 μV) provide clear and dynamic sound.

 

Multi-processor architecture

Each device subsystem (audio, digital and wireless) has its own processor and power supply, ensuring stability and minimizing interference.

 

Body

Made of aircraft-grade aluminum with a multi-layer PVD coating, the device body combines durability with an elegant appearance. The durable design and Corning Gorilla Glass 5 coating protect the screen and prevent fingerprints.

 

4″ Retina LCD Screen

The PAW GT2 is equipped with a 4-inch IP5 Retina LCD display with crystal clear images, protected from scratches and fingerprints.

 

Additional modes and filters

Support for asynchronous USB decoding, LDAC and other Bluetooth protocols, the ability to work as a DAC for PCs and mobile devices with PMEQ, ATE filters and upsampling support.

 

 

Lotoo PAW GT2 Specifications

 

Formats : DSD 64/128/256/512 DFF/DSF/ISO, WAV, MP3, FLAC, APE, OGG, M4A, AAC
Sampling frequency : DSD up to DSD512, PCM up to 768kHz
Processor : Freescale i.MX 6, ADI Blackfin BF706 DSP, Ingenic X1000
Screen : 4 inches, 800×480, touch
DAC : AK4191EQ + 2 x AK4499EX
XRC : AKM4137EQ
Headphone Amplifier : BUF634A x 4
Headphone jacks : 3.5mm (unbalanced), 4.4mm (balanced)
USB Ports : USB 3.1 Gen2 Type-C OTG (USB Storage/DAC Modes) x 1
Storage : SD UHS-II 4.0 up to 2TB, speed up to 300MB/s
Battery : 3.7V, 8300mAh Li-Po
Bluetooth Audio : SBC, AAC, LDAC
Lotoo Wireless Protocol : LTTP
Wi-Fi : supported
Streaming : DLNA
Dimensions : 70.8 x 132.8 x 32.4 mm (excluding protrusions)
Weight : 388 g

 

Headphones – 4.4mm balanced:

  • Maximum output level: +20.3 dBu (S Mode)
  • Maximum power: 1000 mW/channel (32Ω), 620 mW/channel (100Ω), 210 mW/channel (300Ω), 104 mW/channel (600Ω)
  • Channel separation: 122 dB
  • Frequency response: +0.006/-0.04dB (20~20kHz)
  • SNR: 133 dB (20~20kHz, A-weighted)
  • THD+N: 0.00013% @1kHz
  • Noise level: 0.9 µV

 

Headphones – 3.5 mm unbalanced:

  • Maximum output level: +14.2 dBu (S Mode)
  • Maximum power: 460 mW/channel (32Ω), 156 mW/channel (100Ω)
  • Frequency response: +0.004/-0.05dB (20~20kHz)
  • SNR: 129 dB (20~20kHz, A-weighted)
  • THD+N: 0.00020% @1kHz
  • Noise level: 0.8 µV

 

Pricing & Dealers

Lotoo PAW GT2 MSRP €3349

Lotoo Dealers 

Category
Lotoo News